Fraud Blocker

transmission

Sub-Plate Mounted Valves

Call us about any kind of valves you may have, call us at 662-871-8403 [email protected]

Sub-Plate Mounted Valves Read More »

Valves That Are For Hydraulic, Vacuum & Pneumatic Use

These valves take foot, manifold or subplate mountings. They use a pad of protection for the control of the media that goes in between the spool and valve body to give snappy response time. You will find an oring at both ends of the spool to give extra steadiness. It comes four ported valves. Air

Valves That Are For Hydraulic, Vacuum & Pneumatic Use Read More »

Manual Pilot – Directional Control Valves

When you order parts you will need to do the following: Make sure you know the size, the ports, any options you want on there, need to know if it air, oil or some other type of fluids. And if you order the main valve, see if you need the secondary actutator. And lastly tell

Manual Pilot – Directional Control Valves Read More »

Mechanical Valves – Directional Control

Diagrams show different ways to order. These valves are made small so they can fit anywhere and fit on most production type machinery. You can order these in several different styles and have 2,3 and 4 way controls. You can request all this when you order. Call us at 662-871-8403 [email protected]

Mechanical Valves – Directional Control Read More »

Directional Valve & 2/3/4 Way Valves General Information

If you need more information on these types of valves, call us at 662-871-8403 [email protected]

Directional Valve & 2/3/4 Way Valves General Information Read More »

Spool Variety’s and Spool Control

Call us with any questions you have about this unit. 662-871-8403 [email protected]

Spool Variety’s and Spool Control Read More »

Integral Regulator Filters

Ordering a gauge – put G Ordering an automatic drain impluse – D and F for float Ordering one with an adustment knob – K Ordering one with bracket mount regulator – B Just make sure you put these letters in your ordering of different options you want. If you happen to use a poly

Integral Regulator Filters Read More »

Filter Regulator Lubricator – Trio Combo

Pressure on the bowls don’t need to go over 150 psi and temps don’t need to go over 120 degrees. If it is a metal bowl max is 250 psi and 200 degrees on the temp. They suggest you use bowl guards if it is a polycarbonate one (bottom right diagram). If you need more

Filter Regulator Lubricator – Trio Combo Read More »

Sub Small Scale Regulators

The regulators are made to work with low volume air flow or that is not going anywhere. You can choose from two mounting styles. If you use a panel mounting it has barbed fittings that have connection the size of 1/16″- 1/8″ ID tubing and a panel nut. You also can choose sub base mounting,

Sub Small Scale Regulators Read More »

Automatic Drains – Impulse and Float

A. Impulse Drains This type of drain does not have levers, pilot device or levers. Has one part that moves. Has an actuator that doesn’t let it gunk up or let debris in that will not let it drain properly. B. When air goes thru the filer (A), (B) has the same amount of pressure

Automatic Drains – Impulse and Float Read More »