Fraud Blocker

racine

Eaton Hydraulic Series 33-64 Motor Valve Block/Integral Valves

If you motor has a valve block put in orings and backup rings on the valve block. The high pressure ports need an oring and backup ring. Put the oring on first and then the back up ring. You will see a curved side of the ring needs to go toward the oring. Put he […]

Eaton Hydraulic Series 33-64 Motor Valve Block/Integral Valves Read More »

Racine Volume Vane Pump PSQ

Below is the chart that tells the meaning of what the letters and numbers mean in the model number of a pump or motor. The order to tighten up screws 1 A. 6 screws on rear cover 50lbs in numerical order 1B. 6 screws on rear cover 36040in – lbs numberical order 2 Before you

Racine Volume Vane Pump PSQ Read More »

Parker – Denison Goldcup Series 6C/7A/8A Variable Displacement With An Auxiliary Ensemble

Drive shaft and bearing need to be cleaned thoroughly and put a coating of oil on them to help with wear and tear on the parts. To put the drive shaft back together start with a retaining ring going over the internal end of the shaft and put in the groove that is closest to

Parker – Denison Goldcup Series 6C/7A/8A Variable Displacement With An Auxiliary Ensemble Read More »

Vickers Inline Variable Pump PVB6/PVB5/MVB5- F-UDY-21

The model code is layed so you know what the meanings of the letters and numbers mean. Pintle Bearing Model (if it has a black square = valve plate S/A PVB*-RS-21-C(*)-11 942223 PVB*-LS-21-C(*)-11 942224 PVB*-RD-21-HM-10 942225 PVB-LD-21-HM-10 942224 MVB5-UD-20-HM-10 942227 Pressure Range PSI Compensator Kit Spring C 250-3000 (PVB5) White circle with a line thru

Vickers Inline Variable Pump PVB6/PVB5/MVB5- F-UDY-21 Read More »

Eaton Neutral Lockout ID & Assembly In Open Position

Identification There are 2 different sized of this adapter, make note of which one you will need. Tne newest model has a 9/16″ thread on the switch and the older one has a 3/4″ thread on the switch. So when you need to order another kit, the adapter will be in there. Also, the new

Eaton Neutral Lockout ID & Assembly In Open Position Read More »

HPV Series Hydraulic Piston Pump – Mounting Flange

Here are several characteristics of these types of pumps. It has five different displacements, .88, 1.25, 2.09, 2.62 and 3.78 cubic inches per rotation Straightforward Design and built to last. The size is small so it can be put in tight spaces and runs quietly. The displacement is adjustable to help with flow rate needs

HPV Series Hydraulic Piston Pump – Mounting Flange Read More »