Cylinder Check
If you need more on this type of cyilnder or if you need to have your cylinder repaired, call us at 662-871-8403 [email protected]
drives
Heat Exchangers Series K
To hookup fluid that is hot in the lines and the water that is cooled in the lines you will need an automatic water regulating valve. You will need to put in inlet end of the cooler. Then put the water outlet piping in such a way that the exchanger stays submerged with water and
Series 102 Hall Pump Valve
Input shaft extras – 1″ – 1 1/4″ Keyed 1 1/4″ 14 Toothed 7/8″ 13 Toothed Shaft Endcover extras – 4 bolt SAE C 2 Bolt SAE B & C Pad Mount The Series 102 has a single input shaft like the 101 Series. Also has a primary mount to the gear box/PTO. The 102
Series 101 Hall Pump/Motor
If you need more information on this model, give us a call at 662-871-8403 [email protected]
Hydraulic Valves
If you need further information on these valves, call us at 662-871-8403 [email protected]
Air Presser Amplifiers Series M & 4
There are several types of these amplifiers to choose from. The pressure parameters are 100 PSI to 500 PSi. To prevent your unit from runaways, most let the inlet air to stabilize at the outlet before you let unit to cycle. If you need more info on this unit, call us at 662-871-8403 or 800-361-0068
Thrust Plates That Are Pressure Balanced
This type of thrust plate is totally interchangeable and be put in new or older machinery. If you do have an older machine, before you put the new parts into, make sure to do an overhaul to take out worn parts and put in new ones. Along with your new plates. They are very easy
Series 25 Valves That Are Base Mounted
If you need more information on solenoid valves and manifolds, Call us at 662-871-8403 [email protected]
Series 750 Hall Pump/Motor
If you need to know more information or you are in need of repairs. Call us at 662-871-8403 [email protected]