Look on the model code for control data information each model. C and CM Pressure Compensators This means it will intuitively change how the pump will handle pressure at a predetermined time and amount of pressure at the time it is needed. The amount of pressure can go up or down (60 – 90 psi) […]
Vickers PVB/PVB5/PVB10/PVB6/PVB15/PVB29 Control Data Read More »
If you need more info on this particular pump or any Make of Vickers Hydraulic Pumps or Motors, call us at 662-871-8403 [email protected]
Call us for any of your Dynapower Cube 9 or Goldcup needs at 662-871-8403 or 800-361-0068 [email protected] [email protected]
The model code is layed so you know what the meanings of the letters and numbers mean. Pintle Bearing Model (if it has a black square = valve plate S/A PVB*-RS-21-C(*)-11 942223 PVB*-LS-21-C(*)-11 942224 PVB*-RD-21-HM-10 942225 PVB-LD-21-HM-10 942224 MVB5-UD-20-HM-10 942227 Pressure Range PSI Compensator Kit Spring C 250-3000 (PVB5) White circle with a line thru
Vickers Inline Variable Pump PVB6/PVB5/MVB5- F-UDY-21 Read More »
The feedback link changed in the sense on the new models there is no need for the counter bore for the swashplate link. It gave more clamping power for loads that were put together with the servo arm. But now the bore is not needed anymore, instead they changed the servo arm. You will be
Sundstrand Series 90 Feedback Link & Side Cover Insert Read More »
This change will affect these models, 90-55, 75 and 100cc variable pumps. They added a rubber gripping element on the pin that goes in the main pump housing. It helps in retaining the pin in the housing while in normal pump assy. It also helps in servicing parts, maximizing the interference fit that is between
Sundstrand Series 90-55cc Swashplate Bearing Cage Locator Pin Change Read More »
Sundstrand improves the swashplate leveler and spring seat. It used to be two springs, now it is four. And you cannot get these parts any longer, nor are they available for service parts either. Below you can see what parts have been affected. or 800-361-0068 Email us at [email protected]
Sundstrand Series 90 130cc Swashplate Lever Improvements Read More »
One of the changes made is that there will be shims go in between the swashplate leveler springs and the end cap in the pump. They have changed the leveler spring seats into a hardened piece, so there are two pieces now. Use to the seats were made into the leveler. This will make a
There are particular units that will determine the flow of a lubricant . There are certain flow signals is found on either on the suction side or discharge side of the pump. Another name for this also can be flow meter, where you need to look. The header system has two groups, simple line or
Automatic Lubrication Procedures – Flow of Lubricant Thru the System Read More »