Limit of viscosity rangeFor operating applications you will need to follow these guidlines:nmín = 60 SUS (10 mm2/s) for not so long periods (t £ 1 min) at max. perm. The fluid temperature of 239 °F (115 °C). Make a note that the max. leakage fluid temperature of 239 °F (115 °C) doesn’t go over […]
If you need more info on the 90 Series, give us a call at 66-2871-8403 or 800-361-0068 [email protected]
If we can assist you with answering questions or repairing your unit, call us at 800-361-0068 [email protected]
Sundstrand Series 15 Pumps/Motors – Troubleshooting Read More »
Swashplate hold down pin and motor shaft changes. If you need further assistance with this or any Sundstrand Pump and Motor, call us at 662-871-8403 or 800-361-0068 [email protected] [email protected]
The charge relief and loop flushing apparatus on the older models will still be available in the parts manual. The new part numbers are listed above. The older models the swashplate and pivot arm will no longer be available to get as service parts. And these parts are no interchangeable. You will have to put
Model 12 SAE E Flange & Shaft Call Us for Any Questions You May Have 800-361-0068 662-871-8403 [email protected] [email protected]
Dynapower Cube 12 Generation ll Parts Diagram & Parts List – Part Two Read More »
Black triangle means: this for loading sensing pressure limiter PVB5/6………………191 PVB10-15…………..222 PVB20/29………….250 On port tapping: Port Type Port Tapping A PFB5 .56518UNF-2B 28.7 PVB5/6 .562518UNF-2B 19 PVB10/15 .750016UNF-2B 29.3 PVB20/29 .750016UNF-2B 38.9 If you need more information on this unit, call us at 662-871-8403 or 800-361-0068 [email protected] or [email protected]
Vickers PVB 20/29 Axial Piston Pump – Remote Control Of Compensator Read More »
Here is a diagram view of the parts for this unit and options you have. This is a good diagram to keep, so you can order parts later. The option on this is having a high pressure seal. This depends on the load and job application you needing to deal with. Some of these parts
The support rods are in each of the tandem mounting kits. There are different height differences for each type of job you want it to do, that they leave it up to the customer to bring their own rods and lock nuts. On the chart are support guide diameters and how you should mount it.
Variable Displacement with Auxiliary Package You will need to place the spacers on the screws and go thru the balance plate and servo stem. Put these parts thru the opening in the side of the housing assy. and place the screws over the tapped holes in the rocker cam. Put the parts up next to
Denison Hydraulics Goldcup Series 6C, 7A & 8A Axial Piston Pump – Mechanical Shaft Seal Read More »