Parker M2/4 Series General Information
If you have questions about this Parker unit or any Parker models, we can help with repairs or get you a brand new one. Call us today for a Quote ….662-871-8403 [email protected]
rexroth
Sundstrand 90 Series Motor 75CC
They put in an extra procedure to the spline part of the block. These three groove identification measures will be put on there to let you know you have a new model. Other measurements on the block want change. The pumps want change, but your service kits for the block will have this procedure on
Sundstrand Series 90/100cc – Charge Relief Seat Change
They are making changes to the 55cc, 75cc and 100cc fixed displacement motor and 55cc/75cc variable displacement motors. Right now it has an indented seat in the endcap. It gave it a more wearable area for the charge pressure relief valve poppet. Now it has been machined to sit right into the surface that it
Sundstrand Series 90/100cc – Charge Relief Seat Change Read More »
Eaton Series 11 Check Valve
To assemble this put the retaining ring and check valve balls in the holes of the pintle. Push a new check valve into the holes and push it hard enough it goes past the coil pin allowance. And don’t push so hard you make the retaining rings you make the check valves come out
Eaton Pump Ball Guide 33-76 Series
Thick Plate is 101315 Code 61 SAE split flange, 5000 PSI, drilled and tapped for 3/8-16 UNC 28 thread bolt Code 62 SAE split flange, 6000 PSI, drilled and tapped for 7/16-14 UNC 28 thread bolt If you need more info on this unit, call us at 662-871-8403 [email protected]
2200 Series Pump/Motor Specs
This is done in metric diimensions. Let us know if we can assist you with answers to questions or if we can repair your unit. 662-871-8403 800-361-0068 [email protected] [email protected]
Hydraulic Cylinder
A hydraulic cylinder (also called a linearhydraulic motor) is a mechanical actuator that is used to give a unidirectional force through a unidirectional stroke. It has many applications, notably in construction equipment ( equipment, vehicles) manufacturing machinery, elevators) and civil engineering. A hydraulic cylinder is the actuator or “motor” side of this system. The “generator”
Sundstrand 24 Series HDC and EDC – Specs
Marked on both diagrams, it is marked for the larger link pictures that is needed for this unit. Helps in setting the adjustment for the controller. If you need your controller repaired or need a new controller, we can assist you with that. We provide HDC, EDC and MDC controllers. So give us a call
Dynapower Cube 9 Generation ll Part ll
If you need more info on this unit or any of the Dynapower Models, call us at 800-361-0068 [email protected]
Racine Controls
If you need more info on controls or any Racine pumps and motors, call us at 800-361-0068 or 662-871-8403 [email protected] or [email protected]